Medium section winding machine

This machine is suitable for looping and binding of 10-70mm² medium cross-section wires or circular sheathed wires with a diameter less than 20mm. This product has high production efficiency and the quality of wiring is at the advanced level of similar products. The main components and technical characteristics of the equipment are as follows:

A. TF-1250 shaftless pay-off rack

1. Applicable cable reel: φ800-1250mm;

2. Applicable cable: 10-70mm² or wire diameter less than 20mm;

3. Payoff speed: 0-150m/min;

4. Maximum load: 3T;

5. Opening and closing method: manual opening and closing;

6. Lifting method: oil pressure lifting, upper and lower discs of top shaft rotating arms on both sides;

7. Braking method: magnetic powder tension braking;

B. European high-precision meter

1. Meter measurement form: four wheel track type;

2. Maximum line speed: 500m/min;

3. Wire diameter range: 2-40mm;

4. Measurement accuracy: 0.1% (one thousandth);

5. Tightening method: manual air pressure;

6. Induction method: rotary encoder;

C. Middle cutting and binding machine

1. Cable layout method: automatic cable layout;

2. Engine speed: 200 rpm;

3. Outer diameter of tie wire: ≤ 650mm;

4. Number of cable slots: 3 slots;

5. Motor power: 5HP (3.7KW) variable frequency control;

6. Inner diameter of tie wire: φ 200mm (according to customer requirements);

7. Applicable cable: 10-70mm² or wire diameter less than 20mm;